Upgrade from pfsense 1.2.3 to 2.0

[Aymen Belkhiria]

Hi all,


After upgrade to pfsense 2.0 RC3 I have a problem to manage the WAN
interface.

I have a port forward work fine with pfsense 1.2.3 but when I upgraded to
2.0, something block the traffic
and I can't access to the application from outside.


when I did nmap on my global IP I can see the port is open but I can't reach
the application.
seems something wrong with NAT.


Any Help?


Thanks

[Seth Mos]

Post by Aymen Belkhiria
Hi all,
After upgrade to pfsense 2.0 RC3 I have a problem to manage the WAN
interface.
I have a port forward work fine with pfsense 1.2.3 but when I upgraded
to 2.0, something block the traffic
and I can't access to the application from outside.

Please confirm that you have a allow firewall rule on the WAN interface
from source any, port any to WAN IP port <webgui port>.

It should just work.

Kind regards,

Seth

---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscribe-***@public.gmane.org
For additional commands, e-mail: support-help-***@public.gmane.org

Commercial support available - https://portal.pfsense.org

[Aymen Belkhiria]

Hi Seth,

Thanks for the quick answer,
when I created the rule I was able to access to Web-gui pfsense interface
from outside.


Thanks

Post by Seth Mos

Post by Aymen Belkhiria
Hi all,
After upgrade to pfsense 2.0 RC3 I have a problem to manage the WAN
interface.
I have a port forward work fine with pfsense 1.2.3 but when I upgraded
to 2.0, something block the traffic
and I can't access to the application from outside.

Please confirm that you have a allow firewall rule on the WAN interface
from source any, port any to WAN IP port <webgui port>.
It should just work.
Kind regards,
Seth
---------------------------------------------------------------------
Commercial support available - https://portal.pfsense.org

[A Mohan Rao]

I also have same problem. When shift to 2.0, port forwarding NAT or
also not working openvpn... Pls guide if any have that solution...
Thnx mohan 9826061122

Post by Seth Mos

Post by Aymen Belkhiria
Hi all,
After upgrade to pfsense 2.0 RC3 I have a problem to manage the WAN
interface.
I have a port forward work fine with pfsense 1.2.3 but when I upgraded
to 2.0, something block the traffic
and I can't access to the application from outside.

Please confirm that you have a allow firewall rule on the WAN interface
from source any, port any to WAN IP port <webgui port>.
It should just work.
Kind regards,
Seth
---------------------------------------------------------------------
Commercial support available - https://portal.pfsense.org