BGP support in 2.0

[Typo3 on Gmail]

Does 2.x have BGP support ?
We have 2 providers that we wish to connect to via BGP

Chris - tried to shoot you a msg via skype about a quote - if you can hit me up off list - that be great as well :-)



---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscribe-***@public.gmane.org
For additional commands, e-mail: support-help-***@public.gmane.org

Commercial support available - https://portal.pfsense.org

[William Jimenez]

That's a good question...I'd like to know too.

Post by Typo3 on Gmail
Does 2.x have BGP support ?
We have 2 providers that we wish to connect to via BGP
Chris - tried to shoot you a msg via skype about a quote - if you can hit

me up off list - that be great as well :-)

Post by Typo3 on Gmail
---------------------------------------------------------------------
Commercial support available - https://portal.pfsense.org

[Typo3 on Gmail]

We have been using 1.2.3 and have not pushed forward for fear of loosing BGP.
I placed vyatta up elsewhere but truth is - I still think pfsense kicks it teeth in :-)

Post by William Jimenez
That's a good question...I'd like to know too.

Post by Typo3 on Gmail
Does 2.x have BGP support ?
We have 2 providers that we wish to connect to via BGP
Chris - tried to shoot you a msg via skype about a quote - if you can hit me up off list - that be great as well :-)
---------------------------------------------------------------------
Commercial support available - https://portal.pfsense.org

[Chris Buechler]

Post by Typo3 on Gmail
Does 2.x have BGP support ?

Yes, and considerably improved from 1.2.3 where you have a full
Internet routing table or two as we've done some tweaks there to
prevent PHP from running out of memory with very large routing tables.

Post by Typo3 on Gmail
Chris - tried to shoot you a msg via skype about a quote - if you can hit me up off list - that be great as well :-)

Send me the info you mentioned offlist.

---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscribe-***@public.gmane.org
For additional commands, e-mail: support-help-***@public.gmane.org

Commercial support available - https://portal.pfsense.org

[William Jimenez]

Is it a package that has to be installed?

Post by Chris Buechler

Post by Typo3 on Gmail
Does 2.x have BGP support ?

Yes, and considerably improved from 1.2.3 where you have a full
Internet routing table or two as we've done some tweaks there to
prevent PHP from running out of memory with very large routing tables.

Post by Typo3 on Gmail
Chris - tried to shoot you a msg via skype about a quote - if you can hit

me up off list - that be great as well :-)

Post by Chris Buechler
Send me the info you mentioned offlist.
---------------------------------------------------------------------
Commercial support available - https://portal.pfsense.org

[Nathan Eisenberg]

Post by Typo3 on Gmail
Does 2.x have BGP support ?
We have 2 providers that we wish to connect to via BGP

It does, and it works great. Multiple production deployments using it to advertise routes. All outbound - not accepting any prefixes inbound, so can't speak to how well that works. If Chris says it works well though, I believe him!

Nathan

---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscribe-***@public.gmane.org
For additional commands, e-mail: support-help-***@public.gmane.org

Commercial support available - https://portal.pfsense.org

[Adam Thompson]

I've been accepting ~ 13k routes inbound advertising nothing. So that part works, too.
Now you just need confirmation from someone who does both!
-Adam Thompson

Post by Nathan Eisenberg

Post by Typo3 on Gmail
Does 2.x have BGP support ?
We have 2 providers that we wish to connect to via BGP

It does, and it works great. Multiple production deployments using it to advertise routes. All outbound - not accepting any prefixes inbound, so can't speak to how well that works. If Chris says it works well though, I believe him!
Nathan
---------------------------------------------------------------------
Commercial support available - https://portal.pfsense

[Chris Buechler]

I've been accepting ~ 13k routes inbound  advertising nothing.  So that part works, too.
Now you just need confirmation from someone who does both!

I setup one that does both last week, gets full Internet routing
table, ~360K routes each, from two providers. And advertises their AS.

---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscribe-***@public.gmane.org
For additional commands, e-mail: support-help-***@public.gmane.org

Commercial support available - https://portal.pfsense.org

[Nathan Eisenberg]

I setup one that does both last week, gets full Internet routing table, ~360K
routes each, from two providers. And advertises their AS.

What about IPv6? ;)

---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscribe-***@public.gmane.org
For additional commands, e-mail: support-help-***@public.gmane.org

Commercial support available - https://portal.pfsense.org

[Chris Buechler]

On Wed, Aug 3, 2011 at 6:19 PM, Nathan Eisenberg

Post by Nathan Eisenberg

I setup one that does both last week, gets full Internet routing table, ~360K
routes each, from two providers. And advertises their AS.

What about IPv6? ;)

Should work on the 2.1 branch with manual bgpd.conf configuration,
haven't tried it though.

---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscribe-***@public.gmane.org
For additional commands, e-mail: support-help-***@public.gmane.org

Commercial support available - https://portal.pfsense.org

[Dan Candea]

Post by Chris Buechler

Post by Adam Thompson
I've been accepting ~ 13k routes inbound advertising nothing. So that part works, too.
Now you just need confirmation from someone who does both!

I setup one that does both last week, gets full Internet routing
table, ~360K routes each, from two providers. And advertises their AS.

could you tell us the hardware configuration?
thank you

[Cleber L. Medina]

I configured thje imspector on RC3, but it dont make any report... there
are some bug?


Thanks


Cleber Medina


---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscribe-***@public.gmane.org
For additional commands, e-mail: support-help-***@public.gmane.org

Commercial support available - https://portal.pfsense.org

[Bill Marquette]

Post by Cleber L. Medina
I configured thje imspector on RC3, but it dont make any report... there
are some bug?

Which imspector package did you use? Also, what protocol isn't logging?
Thanks

--Bill

[Chris Buechler]

I've been accepting ~ 13k routes inbound  advertising nothing.  So that part works, too.
Now you just need confirmation from someone who does both!
I setup one that does both last week, gets full Internet routing
table, ~360K routes each, from two providers. And advertises their AS.
could you tell us the hardware configuration?

Depends on how much bandwidth you're using, and how many routing
tables you're getting. Two full Internet routing tables, a total of
around 730K routes, was taking up somewhere around 400-500 MB RAM. The
other hardware sizing factors are no different from any other install,
see the hardware sizing guide on www.pfsense.org.

---------------------------------------------------------------------
To unsubscribe, e-mail: support-unsubscribe-***@public.gmane.org
For additional commands, e-mail: support-help-***@public.gmane.org

Commercial support available - https://portal.pfsense.org

[A Mohan Rao]

Anybody can help where i see live log for example : if any lan user
access public ftp or http server pfsense can have that user live log
if yes where i see that log.. . Thanks mohan rao

Post by Chris Buechler

I've been accepting ~ 13k routes inbound  advertising nothing.  So that
part
works, too.
Now you just need confirmation from someone who does both!
I setup one that does both last week, gets full Internet routing
table, ~360K routes each, from two providers. And advertises their AS.
could you tell us the hardware configuration?

Depends on how much bandwidth you're using, and how many routing
tables you're getting. Two full Internet routing tables, a total of
around 730K routes, was taking up somewhere around 400-500 MB RAM. The
other hardware sizing factors are no different from any other install,
see the hardware sizing guide on www.pfsense.org.
---------------------------------------------------------------------
Commercial support available - https://portal.pfsense.org